Now we need to add lines to allow us to read from the input file and calculate the mean. See Code Listing 4-19 in the textbook for an example of how to do this. a. Create a File object passing it the filename. b. Create a Scanner object passing it the File object. 2. Use Code Listing 4-20 as an example of how to read numbers from a file. 3. Write a loop that continues until you are at the end of the file. 4. The body of the loop will: a. convert the line into a double value and add the value to the accumulator b. increment the counter c. read a new line from the file 5. When the program exits the loop close the input file. 6. Calculate and store the mean. The mean is calculated by dividing the accumulator by the counter. 7. Compile, debug, and run. You should now get a mean of 77.444, but the standard deviation will still be 0.000.

Which law requires employers to provide safe working environments for their employees? a. civil rights act b. fair labor standards act c. occupational safety and health act d. wagner act

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Lakendra finished working on her monthly report. in looking it over, she saw that it had large blocks of white space. what steps could lakendra take to reduce the amount of white space?