write a report describing the information each function as for and what information it produces so that you can begin building your own user manual for this tool the tool is autopsy and sleuthkit ​

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Answer these and get 40 points and brainliest

Write a program that reads a set of floating-point values. ask the user to enter the values, then print • the average of the values. • the smallest of the values. • the largest of the values. • the range, that is the difference between the smallest and largest. of course, you may only prompt for the values once.