Use the CLI to answer the following questions (print these instructions and record your answers): Which device is connected to the Memphis FastEthernet0/1 interface? Branch1 Branch2 Branch3 Chicago Miami Which device is connected to the Memphis Serial0/0/1 interface? Branch1 Branch2 Chicago Miami What is the IP address of the device connected to the Memphis Serial0/0/0 interface? 192.168.30.66 192.168.30.130 192.168.30.1 172.16.224.2 172.16.240.2 What is the IP address of the device connected to the Memphis FastEthernet0/0 interface? 192.168.30.1 192.168.30.66 192.168.30.130 172.16.224.2 172.16.240.2 Which remote port connects Branch3 to the Memphis router? FastEthernet0/0 FastEthernet0/6 FastEthernet0/24 GigabitEthernet0/1 Serial0/0/0 Serial0/0/1 Which remote port connects Miami to the Memphis router? FastEthernet0/0 FastEthernet0/6 FastEthernet0/24 GigabitEthernet0/1 Serial0/0/0 Serial0/0/1 Which platform is running on the device connected to the S0/0/1 interface?

Where would you click to edit the chart data?

Q-1 which of the following can exist as cloud-based it resources? a. physical serverb. virtual serverc. software programd. network device

Now you’re on your own. include a short summary of this section with plots in your lab report. write a matlab script file to do steps (a) through (d) below. include a listing of the script file with your report. 1 the soundsc(xx,fs) function requires two arguments: the first one (xx) contains the vector of data to be played, the second argument (fs) is the sampling rate for playing the samples. in addition, soundsc(xx,fs) does automatic scaling and then calls sound(xx,fs) to actually play the signal. mcclellan, schafer, and yoder, dsp first, 2e, isbn 0-13-065562-7. prentice hall, upper saddle river, nj 07458. c 2015 pearson education, inc. 4 mcclellan, schafer and yoder, signal processing first. prentice hall, upper saddle river, new jersey, 2003. c 2003 prentice hall. (a) generate a time vector (tt) to cover a range of t that will exhibit approximately two cycles of the 4000 hz sinusoids defined in the next part, part (b). use a definition for tt similar to part 2.2(d). if we use t to denote the period of the sinusoids, define the starting time of the vector tt to be equal to t , and the ending time as ct . then the two cycles will include t d 0. finally, make sure that you have at least 25 samples per period of the sinusoidal wave. in other words, when you use the colon operator to define the time vector, make the increment small enough to generate 25 samples per period. (b) generate two 4000 hz sinusoids with arbitrary amplitude and time-shift. x1.t / d a1 cos.2