What does it mean to have 2 warnings on and what if i get another one?

The thickness of a part is to have an upper specification of 0.925 and a lower specification of 0.870 mm. the average of the process is currently 0.917 with a standard deviation of 0.005. determine the percentage of product above 0.93 mm.

Hi plz 11 ! when planning a table, what step comes first: "define the column headers" or "calculate the number of columns/rows"? a. calculate the number of columns/rows b. define the column headers

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to