What is wrong with the following code? numl = int (input("Enter a number: "))
numz = int (input("Enter a number: "D)
num3 = int (input("Enter a number: "))
print ("The average is: + (numl + num2 + num3/3)
The last line should be print ("The average is: (numl + num2 + num/3)
The variables should be lnum, 2num, Bnum
It needs a into command
It needs a stro command

If an appliance consumes 500 w of power and is left on for 5 hours, how much energy is used over this time period? a. 2.5 kwh b. 25 kwh c. 250 kwh d. 2500 kwh

5.a fishing rod is formed from a composite material of 0.5 kg of glass fibers embedded in a matrix of 0.5 kg of epoxy resin. the glass fibers are assumed to be long, continuous and unidirectional. to achieve a greater stiffness it is proposed to use a different composite that is comprised of long continuous carbon fibers that will be embedded in a matrix of 0.5 kg of epoxy resin. if the modulus of elasticity of the carbon fiber composite is 10% greater than the elastic modulus of the glass fiber composite, estimate the mass of carbon fibers that will be used to make the carbon fiber composite. assume the applied tensile stress is parallel to the direction of the long axis of the fibers. the epoxy resin, glass fiber, and carbon fiber have an elastic modulus of 5, 86, and 350 gpa respectively and a density of 1100, 2500, and 1800 respectively.

This assignment continues work on the online booking facility introduced at the end of chapter- 10. the work will be continued in the assignments for chapters 14 and 15 (a) assume that you will produce your online booking facility using an agile approach. i. suggest the kind of user research you would like to conduct for your product before iteration cycles begin. ii prioritize the requirements for your product according to business value, i.e which requirements are likely to provide the greatest business benefit, and sketch out the ux design work you would expect to undertake during the first four iteration cycles, i.e. cycle 0, and cycles 1 to 3. (b) using one of the mockup tools introduced above, generate a mockup of your product's landing page, as developed in the assignment for chapter-11 (c) using one of the patterns websites listed previously, identify suitable interaction patterns for elements of your product, and develop a software-based prototype that incorporates all the feedback and the results of the user experience mapping achieved at the end of chapter-11. if you do not have experience in using any of these, create a few html web pages to represent the basic structure of your website