What is the next line? >>> tupleF = (2, 5, 2, 2, 5, 5)
>>> tupleF. count(2)

1. so if i wanted to build a linux server for web services(apache) with 1cpu and 2 gb of memory.-operating at 75% of memory capacity2. a windows server with 2 cpu/ 4gb memory- operating at 85% of memory capacity3. a storage server with 1 cpu/ 2gb memory- operating at 85% of memory capacityhow much memory do i have to add for each server.so that the utilization rate for both cpu and memory is at a baseline of 60%."the details for the cpu like its processor or the memory's speed isnt to be concerned" yeah i kept asking my teacher if he's even sure about the but the whole class seems to be confused and the project is due in 3 days..this is a virtualization project where i have to virtualize a typical server into an exsi hypervisor.

Quick pl which one of the following is considered a peripheral? a software b mouse c usb connector d motherboard

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.