R6.1Carry out the following tasks with an array: a. Allocate an array a of ten integers. b. Put the number 17 as the initial element of the array. c. Put the number 29 as the last element of the array. d. Fill the remaining elements with –1. e. Add 1 to each element of the array. f. Print all elements of the array, one per line. g. Print all elements of the array in a single line, separated by commas.

Events and conditions that happen within an organization that are somewhat easier to deal with when responding to change are called

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Ihave a singular monitor that is a tv for my computer. recently, i took apart my computer and put it back together. when i put in the hdmi cord and booted the computer to see if it worked, the computer turned on fine but the screen was blue with "hdmi no signal." i've tried everything that doesn't require buying spare parts, any answer is appreciated!