1. Un circuito consta de una fuente de voltaje de 10V y de una resistencia R de 10 ohm ¿Cuál es el valor de la corriente en este circuito? ¿Qué resistencia R2 debe añadirse en serie con R1 para reducir la corriente a la mitad?

What is the process in which the software development team compiles information to determine the final product.

Pthreads programming: create and terminate a thread write a c++ program that creates a thread. the main will display a message “hello world from the main”. the main will create a thread that will display a message “hello world from the thread” and then terminates with a call to pthread_exit()

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?