I GAVE YOU 33 POINTS JUST ANSWER THIS QUESTION PL 3. What is one step you can take right now to be more media balanced? Write a concrete and actionable step you will take. In your response, include any challenges you might face and how you will address them.

Wireless communications is likely to be viewed as an essential part of an enterprise network infrastructure when: select one: a. mobile communication is needed b. communication facilities must be installed at low initial cost c. communication must take place in a hostile or difficult terrain that makes wired communication difficult or impossible d. the same information must be broadcast to many locations

You are working with a professional edition organization. they wish to install the expense tracker which requires the use of 4 custom tabs, 3 custom objects, and one custom app. if the company is already using 4 applications, 36 custom objects, and 7 custom tabs, what will happen when they try to install expense tracker?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?