0. When the TSL instruction is used for multiprocessor synchronization, the cache block containing the mutex will get shuttled back and forth between the CPU holding the lock and the CPU requesting it if both of them keep touching the block. To reduce bus traffic, the requesting CPU executes one TSL every 50 bus cycles, but the CPU holding the lock always touches the cache block between TSL instructions. If a cache block consists of 16 32-bit words, each of which requires one bus cycle to transfer, and the bus runs at 400 MHz, what fraction of the bus bandwidth is eaten up by moving the cache block back and forth?

This question involves a class named textfile that represents a text file. public class textfile { private string filename; private string filename; private arraylist words; // constructors not shown // postcondition: returns the number of bytes in this file public int filesize() { } // precondition: 0 < = index < words.size() // postcondition: removes numwords words from the words arraylist beginning at // index. public void deletewords(int index, int numwords) { } // precondition: 0 < = index < = words.size() // postcondition: adds elements from newwords array to words arraylist beginning // at index. pub lic voidaddwords(int index, string[] newwords) { } // other methods not shown } complete the filesize() method. the filesize() is computed in bytes. in a text file, each character in each word counts as one byte. in addition, there is a space in between each word in the words arraylist, and each of those spaces also counts as one byte. for example, suppose the words arraylist stores the following words: { mary had a little lamb; its fleece was white as snow. } the filesize() method would compute 4 + 3 + 1 + 6 + 5 + 4 + 6 + 3 + 5 + 2 + 5 as the sum of the lengths of each string in the arraylist. the value returned would be this sum plus 10, because there would also be 10 spaces in between the 11 words. complete the filesize() method below: // postcondition: returns the number of bytes in this file public int filesize() { }