How many types of fundamental movement are there

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Create a class hand in its own module. one object of class hand represents a hand of cards and so one object stores a number of card objects. for this assignment you will submit three separate modules, one with the definition of class card, one with the definition of class hand and one with the main application that thoroughly tests class hand.class hand must contain the following four methods: 1) , numcardsinhand) takes an integer as parameter and initializes a hand object with numcardsinhand card objects inside it. these card objects are generated randomly. for simplicity, assume an infinite number of decks of cards.2) bjvalue(self) returns the blackjack value for the whole hand of cards3) ) returns a string containing all the cards in the hand4) hitme(self) adds one randomly generated card to the handcreate a main program in its own module that thoroughly tests class hand. you will have three modules/files to upload to your etudes assignment submission: card.py, hand.py and the module that contains your main program.two alternatives for extra credit - you cannot get credit for both! (+1 point): after you have thoroughly tested the class hand and all of its methods, add code to your main program that stores one hand object as a pickle file and reads it back into a new hand object. you are only eligible for this extra credit if class hand has all four of the methods above working.or(+2 points): after you have thoroughly tested the class hand and all of its methods, add code to your main program that stores one hand object as a text file on the disk and reads it back into a new hand object. you are only eligible for this extra credit if class hand has all four of the methods above working.notes: -start by making any and all modifications suggested by my comments to your previous submission of class card from assignment #6 "a robust card object"-once your class card is tested and working well, you will not make any further modifications to it for the purposes of class hand.-you can keep the test code for class card intact. if it is indented inside an if __name__ == "__main__", then it will not be executed when your main program's module imports it.-to save time, write and test one method for class hand at a time.-under no circumstances are you to attempt the extra credit until you are completely finished with writing and testing all the methods in class hand.

How does the use of e-mail benefit business communications? it can be sent at any time. it is faster than regular mail. it improves writing skills. it is less expensive than using a courier. it reduces the need for proofreading.