The quicker you can replace failed devices and restore functionality, the quicker your network will be running again. Describe the items you will need in the replacement of a failed device

[a] create a class called “cycle” which has two instance integer variables as properties, “numberofwheels” and “weight.” create a constructor with two parameters, using the same variable names in the parameter list. assign each variable to numberofwheels” and “weight” respectively. write a separate application to test the class and display its properties. note: do not change the names of the instance variables or the variables listed in the constructor’s parameter list. [b] edit your class cycle by adding a default constructor which will assign the default values of 100 to represent the numberofwheels, and 1000 to represent the weight, by invoking a call to the other constructor. modify your application created in [a] to test the class.

10. when you create a pivottable, you need to specify where to find the data for the pivottable. is it true

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.