3.26 LAB: Leap Year A year in the modern Gregorian Calendar consists of 365 days. In reality, the earth takes longer to rotate around the sun. To account for the difference in time, every 4 years, a leap year takes place. A leap year is when a year has 366 days: An extra day, February 29th. The requirements for a given year to be a leap year are: 1) The year must be divisible by 4 2) If the year is a century year (1700, 1800, etc.), the year must be evenly divisible by 400 Some example leap years are 1600, 1712, and 2016. Write a program that takes in a year and determines whether that year is a leap year. Ex: If the input is: 1712 the output is: 1712 - leap year

What role do chromosomes play in inheritance?

Three out of five seniors remain undecided about a college major at the end of their senior year.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to