Write a program in CircuitPython to run on the FM4E that will turn on the heater for one minute if the button is pressed. The LED should be turned on when the heater is on, and it should go off when the heater turns off after one minute. Make sure your code has comments.

Check the explanation

Explanation:

import time

import board

from digitalio import DigitalInOut, Direction, Pull

led = DigitalInOut(board.D13)

led.direction = Direction.OUTPUT

# For Gemma M0, Trinket M0, Metro M0 Express, ItsyBitsy M0 Express, Itsy M4 Express

switch = DigitalInOut(board.D2)

# switch = DigitalInOut(board.D5) # For Feather M0 Express, Feather M4 Express

# switch = DigitalInOut(board.D7) # For Circuit Playground Express

switch.direction = Direction.INPUT

switch.pull = Pull.UP

while True:

# We could also do "led.value = not switch.value"!

if switch.value:

led.value = False

else:

time.sleep # debounce delay

answer; ron will have to compare ( b3: b4); /// good luck

hmu if ur willing to do a algebra a online class i’ll pay 600 hmu on the gram profitpreme