Your corporation hosts a Web site at the static public IP address 92.110.30.123.

A router directs this traffic to a Web server at the private IP address 192.168.11.100.

However, the Web server needs a hardware upgrade and will be down for two days. Your network administrator has asked you to configure the router so that requests to the IP address 92.110.30.123 are redirected to the backup server for the Web site, which has the private IP address 192.168.11.110.

The router's inside Ethernet interface uses IP address 192.168.11.254 and its outside interface uses the IP address 92.110.30.65.

Answer the following questions about the new static route you'll be creating:

What is the router's outside interface IP address?

What is the routers inside interface IP address?

What is the Web sites public IP address?

What is the private IP address of the backup Web server?

Create the NAT translation table entries for the address translation. For the subnet masks, use the default subnet mask for a Class C IP address license. Include appropriate comments line in your table.

Local area networks use many of the same network technologies and the internet, only on a smaller scale. devices that access lans are equipped with a network interface that contains circuitry for wireless or wired connections. devices also have a physical address, in addition to the ip addresses acquired from a dhcp server. the most popular wired technology is . the most popular wireless technology is , which can be configured as a(n) or star topology. setting up a lan and configuring its router is fairly easy. the first step is to change the standard to one that is secure. next, create a(n) that uniquely identifies the network by name. it is also important to activate wireless to prevent wireless signals from being intercepted during transmission. a limited-access network can be created for visitors to use. by activating , the router will be able to assign ip addresses to each device that joins the network. to connect to a secure lan that is protected by encryption, an encryption , or password, is required. lans can be used to access data collected by iot devices and the networks that tie these devices together. technologies such as rfid, nfc, bluetooth smart, zigbee, and z-wave offer -power links, essential for battery-powered devices that can’t expend excess amounts of energy transmitting data.