subject

For each of the following code segments, indicate whether it will successfully compile or cause an error: a) displayValue(100); b) displayValue(6.0); c) short s = 5; d) displayValue(s); e) long num = 1; f) displayValue(num); g) displayValue(6.2f); h) displayValue((int) 7.5);

ansver
Answers: 1

Another question on Computers and Technology

question
Computers and Technology, 22.06.2019 09:00
Howard is designing a chair swing ride. the swing ropes are 5 meters long, and in full swing they tilt in an angle of 29° outside chairs to be 2.75 m above the ground in full swing.
Answers: 1
question
Computers and Technology, 22.06.2019 11:30
Communication is the exchange of information. true false
Answers: 2
question
Computers and Technology, 24.06.2019 15:20
Local area networks use many of the same network technologies and the internet, only on a smaller scale. devices that access lans are equipped with a network interface that contains circuitry for wireless or wired connections. devices also have a physical address, in addition to the ip addresses acquired from a dhcp server. the most popular wired technology is . the most popular wireless technology is , which can be configured as a(n) or star topology. setting up a lan and configuring its router is fairly easy. the first step is to change the standard to one that is secure. next, create a(n) that uniquely identifies the network by name. it is also important to activate wireless to prevent wireless signals from being intercepted during transmission. a limited-access network can be created for visitors to use. by activating , the router will be able to assign ip addresses to each device that joins the network. to connect to a secure lan that is protected by encryption, an encryption , or password, is required. lans can be used to access data collected by iot devices and the networks that tie these devices together. technologies such as rfid, nfc, bluetooth smart, zigbee, and z-wave offer -power links, essential for battery-powered devices that can’t expend excess amounts of energy transmitting data.
Answers: 1
question
Computers and Technology, 24.06.2019 16:00
5.a fishing rod is formed from a composite material of 0.5 kg of glass fibers embedded in a matrix of 0.5 kg of epoxy resin. the glass fibers are assumed to be long, continuous and unidirectional. to achieve a greater stiffness it is proposed to use a different composite that is comprised of long continuous carbon fibers that will be embedded in a matrix of 0.5 kg of epoxy resin. if the modulus of elasticity of the carbon fiber composite is 10% greater than the elastic modulus of the glass fiber composite, estimate the mass of carbon fibers that will be used to make the carbon fiber composite. assume the applied tensile stress is parallel to the direction of the long axis of the fibers. the epoxy resin, glass fiber, and carbon fiber have an elastic modulus of 5, 86, and 350 gpa respectively and a density of 1100, 2500, and 1800 respectively.
Answers: 3
You know the right answer?
For each of the following code segments, indicate whether it will successfully compile or cause an e...
Questions
question
Mathematics, 02.07.2019 14:00
question
History, 02.07.2019 14:00
question
Mathematics, 02.07.2019 14:00
Questions on the website: 13722362