Computers and Technology, 09.01.2020 06:31 princessdriayp6a2o8

Telling a computer that is already on to turn on again is known as what type of boot?

redundant boot
flashing boot
soft boot
hard boot

Answers: 3

Show answers

Answers

Answer from: lowemadison047

Soft Boot

Explanation:

Soft boot is the process in which, a computer is already on and we restart this computer to start it again.

This process is needed to conduct whenever, some software or operating system is not working properly. It is also needed when we install some new software and needs to be reboot the PC. It is also required whenever we install some new software, drivers or games on computers. The system asked us to restart or reboot the computer to operate newly installed application performs its operations in better way.

On the other hand Hard boot means that, power off the compute or controller and switch ON the computer is called hard boot. In this case, first computer is OFF and then ON, so it is not the possible answer. Rest of the two are also not suitable as Flashing boot requires when we update something on motherboard and redundant boot occurs during some failure of the system.

Answer from: Quest

Because the internet has no self-respect and everybody is desperate for short-lived attention to become a stupid meme.

Answer from: Quest

Work with a monitor that’s calibrated and profiled. for critical image editing, calibration and profiling are essential. otherwise, the image you see on your monitor looks different on other monitors or when printed.plan to use adjustment layers to adjust the tonal range and color balance of your image. adjustment layers let you go back and make successive tonal adjustments without discarding or permanently modifying data from the image layer. keep in mind that using adjustment layers adds to the file size of the image and demands more ram from your computer. accessing the color and tonal commands in the adjustments panel automatically creates adjustment layers.if you don’t want to use adjustment layers, you can apply adjustments directly to an image layer. remember that some image information is discarded, when making a color or tonal adjustment directly to an image layer.for critical work and maximum preservation of image data, it’s best if the image you work with is 16 bits per channel (16‑bit image) rather than 8 bits per channel (8‑bit image). data is discarded when you make tonal and color adjustments. the loss of image information is more critical in an 8‑bit image than a 16‑bit image. generally, 16‑bit images have a larger file size than 8‑bit images.duplicate or make a copy of the image file. working on a copy of your image preserves the original in the event you want to use the image in its original state.remove any flaws such as dust spots, blemishes, and scratches from the image before making color and tonal adjustments.open the info or histogram panel in expanded view. as you evaluate and correct the image, both panels display invaluable feedback on your adjustments.you can make a selection or use a mask to confine your color and tonal adjustments to part of an image. another way to apply color and tonal adjustments selectively is to set up your document with image components on different layers. color and tonal adjustments are applied to only one layer at a time. only the image components on the targeted layer are affected.

Another question on Computers and Technology

Computers and Technology, 22.06.2019 20:00

Need asap assignment directions: think of an organization (business, religious institution, volunteer organization, sports team) with which you have been involved. imagine outfitting it with an it infrastructure. prepare a plan for what you would do to support outfitting it. draw a map of a network connecting all the individuals, give them pcs and printers, and lay out the design as best you can. the purpose is to begin working with these concepts, not to build a perfect network.

Answers: 2

Answer

Computers and Technology, 23.06.2019 06:30

On early television stations, what typically filled the screen from around 11pm until 6am? test dummies test patterns tests testing colors

Answers: 1

Answer

Computers and Technology, 23.06.2019 07:30

Write a program that inserts the digits of an integer into an array in originalorderfollowed by reverse order. first, promptthe user to enter a positive integer(> 0). determine the number of digits of the integer. create a dynamically allocated integer arrayof a size twice the number of digits.now insert the digits in original order which will occupy half of the array. then, insert the digits in reverse order.finally, output thedigits in thearray.use at least two functions to organize your program.

Answers: 3

Answer

Computers and Technology, 23.06.2019 11:30

The most accurate readings that you can take on an analog vom are when the meter's pointer is at the a. center scale. b. extreme right. c. near right. d. extreme left.

Answers: 1

Answer

You know the right answer?

Telling a computer that is already on to turn on again is known as what type of boot?

r...

Questions