Write a python program that asks the user to enter a series of single-digit numbers with nothing separating them.

the program should display the sum of all the single-digit numbers in the string.

for example, if the user enters 2514, the method should return 12, which is the sum of 2, 5, 1 and 4.

Ou listened to a song on your computer. did you use hardware or software?

According to the video what are some tasks petroleum engineers perform check all that apply

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to