Keion works as a freelancer creating websites and designing logos for clients. he recently had a hard drive failure and lost work for a client, and he would like to prevent the same type problem from happening again. keion does not want to rely on a backup but would like a way to ensure thathis data is safe on his computer. you recommend that he create a raid array that will duplicate his work onto two disks. what raid configuration should you recommend to keion? raid 0raid 1raid 5raid 10

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to