Assume that ip, jp, and tp have all been declared to be pointers to int and that result has been declared to be an array of 100 elements . assume further that ip has been initialized to point to an element in the first half of the array and that jp has been initialized to point to an element in the second half of the array .
write some code that makes jp point to the element that ip was pointing to and that makes ip point to the element that jp.]
in language c

Look at the far left lane in the picture. explain what the red car is doing and what it needs to do to travel safely.

Which factor is the most important when choosing a website host? whether customers will make secure transactions the number of email accounts provided the purpose of the website the quality of the host control panel

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?