Use the rtl design process to create an alarm system that sets a single-bit output "alarm" to ‘1’ when the average temperature of four consecutive samples meets or exceeds a user-defined threshold value. a 32-bit unsigned input "ct" indicates the current temperature, and a 32-bit unsigned input "wt" indicates the warning threshold. samples should be taken once every two clock cycles. a single-bit input "clr" when set to 1 disables the alarm and the sampling process. when "clr" is released, the previous saved temperature samples are cleared to zero. a

It is not a good idea in a cover letter to mention another person whom the employer knows.

You need a reliable network for about twenty-five computers that will be distributed across a large building. it is important that the network be relatively cheap. which topology should you use?

Which of these options are the correct sequence of actions for content to be copied and pasted? select content, click the copy button, click the paste button, and move the insertion point to where the content needs to be inserted. click the copy button, select the content, move the insertion point to where the content needs to be inserted, and click the paste button. select the content, click the copy button, move the insertion point to where the content needs to be inserted, and click the paste button. select the content, move the insertion point to where the content needs to be inserted, click the copy button, and click the paste button.