Computers and Technology, 11.10.2019 18:30 gonzagaj325

Although digital signals which have partially degraded cannot be fully recovered, computers still operate using these, due to the fact that transistors can only represent two states. true/false

Answers: 3

Show answers

Another question on Computers and Technology

Computers and Technology, 23.06.2019 13:50

Explain how email technologies enable the exchange of messages between users. find out the typical parts of an email address and explain each part.

Answers: 1

Answer

Computers and Technology, 23.06.2019 15:30

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Answers: 2

Answer

Computers and Technology, 24.06.2019 00:00

Afashion designer wants to increase awareness about her brand. which network can she use and why she can use the blank to blank her products online. answers for the first blank: internet, extranet, or intranet answers for the second blank: market, design, and export

Answers: 1

Answer

Computers and Technology, 24.06.2019 07:50

Write a defining table and then a program that determines if you can sleep in or not. your program should get all its input from your computer’s clock. on all weekdays (monday through friday) that are not holidays, your program should output “get up! ” on all other days (weekends and holidays), your program should output “sleep in.” the three holidays that your program must check for are january 1 (new year’s day), july 4 (u.s. independence day), and december 25 (christmas). you don’t need to include other holidays in your program because most other holidays do not occur on a fixed day each year.

Answers: 1

Answer

You know the right answer?

Although digital signals which have partially degraded cannot be fully recovered, computers still op...

Questions