Cutting a stick, a stick n inches long needs to be cut into n 1-inch pieces. outline an algorithm that performs this task with the minimum number of cuts if several pieces of the stick can be cut at the same time. also give a formula for the minimum number of cuts

Choose the best explanation for the following statement communication is symbolic

Based on the current economic situation do you expect the employment demand for graduating engineers to increase or decrease? explain the basis for your answer. with a significant economic recovery, what do you think will happen to future enrollments in graduating engineering programs?

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to