Suppose that you are measuring the time to receive a tpdu. when
an interrupt occurs, you read out the system clock inmilliseconds.
when the tpdu is fully processed, you read out theclock again. you
measure 0 msec 270,000 times and 1 msec 730,000times. how long does
it take to receive a tpdu?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

In microsoft word, when you highlight existing text you want to replace, you're in              a.  advanced mode.    b.  automatic mode.    c.  basic mode.    d.  typeover mode

Lakendra finished working on her monthly report. in looking it over, she saw that it had large blocks of white space. what steps could lakendra take to reduce the amount of white space?