Write a program using integers usernum and x as input, and output usernum divided by x four times. ex: if the input is: 2000 2

You have inserted new slides based on a word outline. how do you format these new slides to match the powerpoint presentation formatting? a. select all slides in the presentation and click format on the home tab. b. select the new slides and click reset on the home tab. c. select all slides in the presentation and click reset on the home tab. d. select the new slides and click format on the home tab.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

1. ask the user how many questions are in the quiz. 2. ask the user to enter the key (that is, the correct answers). there should be one answer for each question in the quiz, and each answer should be an integer. e.g., 34 7 13 100 81 3 9 10 321 12 might be the key for a 10-question quiz. you will need to store the key in an array. 3. ask the user to enter the answers for the quiz to be graded. there needs to be one answer for each question. note that these answers do not need to be stored; each answer can simply be compared to the key as it is entered. 4. when the user has entered all of the answers to be graded, print the number correct and the percent correct. 5. add a loop so that the user can grade any number of quizzes with a single key. after the results have been printed for each quiz, ask "grade another quiz? (y/n)." note: you only have one array (the key). you are not creating a new key for each set of quiz answers.