Create a set of three priority interrupts and show how they are executed between times 0 and 80 as. assume: only one program or interrupt can run at a time each interrupt takes 20 as to complete the priority of the interrupts ranges from irq6 as the highest priority interrupt to irq0 as the lowest priority each level of priority interrupt need not be included. show your results as in the following format using as many times as needed: time action 0 as: start of main program

The reset circuit used on the four 3-bit counters analyzed in this activity reset the counts to zero (000). it makes sense for the up-counters to start at zero (000), but the down-counters should start at seven (111). what would you need to change so that the 3-bit binary down counter with j/k flip-flops you just created would reset to seven (111)?

1. so if i wanted to build a linux server for web services(apache) with 1cpu and 2 gb of memory.-operating at 75% of memory capacity2. a windows server with 2 cpu/ 4gb memory- operating at 85% of memory capacity3. a storage server with 1 cpu/ 2gb memory- operating at 85% of memory capacityhow much memory do i have to add for each server.so that the utilization rate for both cpu and memory is at a baseline of 60%."the details for the cpu like its processor or the memory's speed isnt to be concerned" yeah i kept asking my teacher if he's even sure about the but the whole class seems to be confused and the project is due in 3 days..this is a virtualization project where i have to virtualize a typical server into an exsi hypervisor.

Most shops require the technician to enter a starting and ending time on the repair order to track the actual time the vehicle was in the shop and closed out by the office. this time is referred to as _ time ? a. comeback b. ro c. cycle d. lead