Select the correct order of the gc components

column, recorder, carrier gas, flow controller, detector

recorder, carrier gas, column, detector, injector port

injector port, carrier gas, detector, recorder

carrier gas, column oven, flow controller, detector

carrier gas, flow controller, column, detector, recorder

Carrier Gas, Flow Controller, Column, Detector, Recorder

First we have a cylinder containing the carrier gas. From there, the carrier gas goes to the flow controller, which determines how much carrier gas we are entering into the column (it doesn’t let more gas pass through). Then, the carrier gas enters the column, which is the most important part of the device. The sample enters the column from another place: the injector. Then, the sample and the carrier gas go together across the column. The interactions between the sample and the column will determine how fast each sample component goes through the column, and so: which component gets out earlier. So, at the end, you will have isolated each substance. Then, each one passes (alone) through the detector, which measures something about the sample – this information will let you know which substance it is. Finally, the recorder provides you with the information the detector has found. Nowadays, the recorder is a computer. In the “stone age” they just used a rudimentary printer.

The answer to your question really depends on three things: how much water you have, how cold it is to start out, and how cold the things around it are. water actually freezes when it gets to 32 degrees fahrenheit (0 degrees celsius), but the time it takes to get there may be different.  let's start with the first. if you take two glasses, and fill one with a tiny bit of water, and the other about halfway, then put them both in the freezer, the one with less water will freeze first (you can try this at home, but i recommend using plastic cups and not glass ones).  now let's move on to the second part. let's say you have two glasses, and you fill one with really cold water that has been in the refrigerator, and the other with really hot water from the sink. if you put both of them in the freezer, the one that started out colder will freeze first.  for the third part, let's imagine that you have two glasses with the same amount of water in them, and the water is at the same temperature. imagine putting one outside on a really really cold day in georgia, and having a friend in alaska put one outside on the same day. since it would be so much colder in alaska, the glass of water there would freeze before yours.  so, if you took a tiny bit of really cold water in a glass, and put it outside on a cold day in alaska, it would freeze a lot faster than a big glass of hot water outside on a cold day in georgia. 

Answer : option a) 84explanation :

considering the question as per the attachment

here we can see that the radon nuclide has 222 as the atomic mass number and 86 as the atomic number.

when it undergoes nuclear fission it gives polonium which has atomic mass number as 218 and atomic number will be 84 along with a helium nucleus which has 4 atomic mass number and 2 as its atomic number.

222 = 218 + 4 (atomic mass number)

86 = ? + 2; therefore ? = 86-2 = 84.

the atomic mass number of polonium will be 84.