Chemistry, 16.01.2020 11:31 obeyal77

mercury turns to a vapor at 629.88 k. how much heat is lost when 75.0 g of mercury vapor at 650 k condenses to a liquid at 297 k?
-880 kj

300 kj

299 kj

-25.8 kj

-204 kj

Answers: 1

Show answers

Answers

Answer from: texas101st78

- 25.8 kJ

The overall process of interest in the question is the following

Hg (g) (650 K) → Hg (l) (297 K)

However, for mercury to pass from a gaseous state in 650 K to a liquid state in 297 K, it must go through a series of steps:

Step 1. Gaseous mercury at 650 K should cool down to 629.88 K, temperature corresponding to the vaporization temperature of this substance.

Step 2. Gaseous mercury goes to liquid state at 629.88 K .

Step 3. The liquid mercury at 629.88 K is cooled until it reaches 297 K.

This series of steps can be represented through the following diagram:

Hg (g) (650 K) → Hg (g) (629.88 K) → Hg (l) (629.88 K) → Hg (l) (297 K)

(1) (2) (3)

Then the total heat involved in the process will be equal to the sum of the heats inherent to steps 1, 2 and 3. We proceed to calculate the heats for each of the steps.

Step 1:

The heat in step 1 will be given by

Q = n Cp ΔT

where n is the number of moles of mercury, Cp is the heat capacity and ΔT is equal to the difference between the temperatures at the end (T₂) and at the beginning of the process (T₁), that is to say

ΔT = T₂ - T₁

You should know that the heat capacity or thermal capacity is the energy needed to increase the temperature of a certain substance in a unit of temperature. The heat capacity of mercury is Cp = 27.983 J / mol K

Then the heat in step 1 will be,

Q₁ = 75.0 g x $\frac{1 mol}{200.59 g}$ x 27.983 $\frac{J}{mol K}$ x (629.88 K - 650 K)

→ Q₁ = - 210.5 J

Step 2:

In this step a change in the state of the mercury occurs, since it condenses from a gaseous state to a liquid state. In this case the heat involved in the process will be given by ,

Q = - n ΔHvap

where ΔHvap is the enthalpy of vaporization. The enthalpy of vaporization is the amount of energy necessary for the mass unit of a substance that is in equilibrium with its own vapor at a pressure of one atmosphere to pass completely from the liquid state to the gaseous state. Therefore, to determine the energy necessary for the mercury to pass from gaseous state to liquid, the negative of the enthalpy of vaporization must be taken, as it is done in the previous equation with the minus sign that is placed.

The enthalpy of vaporization of mercury is ΔHvap = 59.11 kJ/mol

Then the heat in step 2 will be,

Q₂ = - 75.0 g x $\frac{1 mol}{200.59 g}$ x 59.11 $\frac{kJ}{mol}$

→ Q₂ = 22.10 kJ → Q₂ = 22100 J

Step 3:

The heat in step 3 will be

Q₃ = n Cp ΔT = 75.0 g x $\frac{1 mol}{200.59 g}$ x 27.983 $\frac{J}{mol K}$ x (297 K - 629.88 K)

→ Q₃ = - 3483 J

Finally the heat involved in the overall process will be ,

Q = Q₁ + Q₂ + Q₃ = - 210.5 J - 22100 J - 3483 J = - 25794 J

→ Q = - 25.8 kJ

So, the heat lost when 75.0 g of mercury vapor at 650 K condenses to a liquid at 297 K is - 25.8 K

Answer from: Quest

these nuts

Answer from: Quest

1 a

2 d

3 a

4 c

explanation:

Another question on Chemistry

Chemistry, 22.06.2019 18:00

Alidded glass container is filled with a colored gas. after a period of time, it is observed that the gas is uniformly spread throughout the box and that the movement has slowed considerably. next, a warm iron plate is carefully placed under the box. why is there resumed movement of the gas in the container?

Answers: 2

Answer

Chemistry, 22.06.2019 20:10

The lattice enthalpy (formation of ionic solid from ions in the gas phase) for agcl(s) is -916 kj/mol and the hydration enthalpy (dissolution of gaseous ions into water) is -850 kj/mol. how much heat (in joules) is involved in forming 1l of saturated agcl solution (1.8 × 10-4 g / 100 ml water) by dissolving agcl(s)? assume solution volume does not change much upon dissolution. the equations are given below. ag+(g) + cl−(g) æ agcl(s)

Answers: 3

Answer

Chemistry, 22.06.2019 21:30

Under which circumstances are kp and kc equal for the reaction aa(g)+bb(g)⇌cc(g)+dd(g)?

Answers: 2

Answer

Chemistry, 22.06.2019 22:00

Show transcript transcripts online experiment: atomic structure [the history of atomic theory] this animation will you test rutherford’s hypothesis that it took a great number of shots to actually hit the nucleus because the size of the atom was so much larger than the nucleus.[clipboard and pencil with a diagram of rutherford’s gold foil experiment] we are going to use a cardboard box to represent the atom, a wooden block to represent the nucleus, and marbles to represent the alpha particles. [animated cardboard box, wooden block, and marbles] the box’s measurements are: length = 50 cm, width = 25 cm, and height = 25 cm. the measurements of the block are: length = 10 cm, width = 10 cm, and height is 5 cm. jose and priscilla will conduct the experiment. [animated boy and girl] priscilla put the block in the box on the floor. jose will close his eyes and drop marbles into the box trying to hit the block. priscilla will count the number of times the marbles hit the block and move the block in the box after each hit. [animated block moving inside the box. marble dropping into the box.] here is priscilla’s data of how many times the marble hit the block. out of 100 marble drops or shots, the marble hit the block 32 times. [data table: first column: marble, with rows 1 to 100; column 2: hit, with rows indicating yes or no. last row: total hits] now you can follow the directions in the experiment to present your findings. present your findings when you are finished with the experiment, complete the following data analysis and record your answers in the essay box below. determine the volume of the box and the block. determine the ratio of the block to the box: multiply this number by 100 to turn it into a percent. complete this statement: the volume of the block is percent of the volume of the box. determine the ratio of the number of hits to the number of shots: multiply this number by 100 to turn it into a percent. complete this statement: the block was hit percent of the time. compare the results of step 2 to the results of step 3. are the percentages similar? write a conclusion discussing the following items: based on your findings, do you think rutherford's hypothesis was reasonable? restate rutherford's hypothesis and describe how you tested it. state whether your results support the hypothesis. if they do not, can you suggest some error in experimental procedure (other than general human error) that might explain it? finally, explain how this experiment confirms the nuclear model of the atom and the idea that most of the atom is empty space.

Answers: 1

Answer

You know the right answer?

mercury turns to a vapor at 629.88 k. how much heat is lost when 75.0 g of mercury vapor at 650 k co...

Questions